1 Tutorial 01 for Arduino: Getting Acquainted with Arduino
Widely cited as the place to start with Arduino, a tutorial series that explains the electrical basics alongside the code.
Topic
126 videos. Ranked by independent recommendations, not by views.
Widely cited as the place to start with Arduino, a tutorial series that explains the electrical basics alongside the code.
Shows how to program ATtiny chips from the Arduino IDE with an Arduino acting as programmer, recommended for moving small projects off a full Arduino board.
A clear explanation of how a 74HC595 shift register works and how to drive many LEDs from a few Arduino pins.
A tutorial on using a transistor to switch a load that an Arduino pin cannot drive directly, commonly suggested for relays, motors and LED strips.
The full Jeremy Blum Arduino series as a playlist, treated by many as a free course that covers the fundamentals from scratch.
An Electronic Basics episode on using a MOSFET as a switch, offered as an introduction to driving higher-voltage loads from a microcontroller pin.
A beginner tutorial on using BJTs and MOSFETs as switches, often suggested when a microcontroller pin needs to drive a motor, laser or other larger load.
Julian Ilett builds a standalone ATmega328P Arduino for about five dollars, a common starting point for people making their own Arduino-compatible boards.
An Arduino lesson series from a former engineer and teacher, repeatedly named as the place for complete beginners to start with microcontrollers.
Paul McWhorter's first Arduino lesson, opening a long free course that newcomers credit with getting them started, though his pace is slow.
Part of Jeremy Blum's Arduino series, driving a DC motor through a transistor; followed by beginners, who often then ask about base resistors and battery choice.
Dave Jones captures an infrared remote's signal on a scope and reproduces it with an Arduino, recommended for understanding IR protocols and carrier modulation.
Andreas Spiess explains why many cheap Arduino soil moisture sensors give poor readings and shows a fix; cited by people building or modifying capacitive sensor boards.
GreatScott's 10x10 LED matrix build using addressable LEDs, often held up as a good starting point for wall-mounted LED displays and backlit panels.
A demonstration of an Arduino-driven Stewart platform balancing a ball, cited as a showpiece for PID and control-system projects rather than as a tutorial.
A showcase of an 8x8x8 LED cube in action, linked as inspiration for ambitious LED projects and as an example of what multiplexing makes possible.
Part 1 of a tutorial linking a Raspberry Pi and an Arduino over nRF24L01+ radios; often cited by people following it who then ask for help.
Shows how to put an ATmega328 into deep sleep and wake it with interrupts or the watchdog, reaching microamp currents on a bare chip.
The official video walkthroughs of the Arduino Starter Kit projects, presented by one of the platform's creators and often suggested as a first course.
A tour of a homemade mission control desk built for a child, packed with switches and lights, shared as a project idea for anyone wanting lots of buttons.
Jeremy Blum's second Arduino tutorial, often pointed to for explaining button debouncing and why a pull-down resistor is needed on an input.
A brief beginner-level MOSFET video, part of a longer series, suggested to Arduino users whose transistor switches run hot or refuse to turn fully on.
A showcase of an Arduino controlled urban aquaponics setup, shared as inspiration for garden automation rather than as a build tutorial.
Often linked as the fix when an Arduino Nano clone with an FTDI chip stops being recognised on Windows after a driver update.
A comparison of three USB to serial adapters that people point to when programming a Pro Mini or bare clone board without onboard USB.
Shared with a wink in Arduino and Raspberry Pi threads as a fitting reply to project photos; the clip itself is not described, so expect a light-hearted reference.
Often linked as a simple walkthrough for pairing a cheap Bluetooth module with an Arduino and controlling it from an Android phone.
Shows an Arduino cutting its own power through a transistor after a button press, offered as an example for battery projects that need near-zero standby current.
A short introduction to the nRF24L01 radio module that gets suggested when someone wants cheap wireless links between Arduinos.
An overview of the cheap A7 GSM and GPS module, recommended when a project needs both mobile data and positioning on a budget.
Shows how to reflash a cheap HC-05 Bluetooth module with RN-42 firmware so it can act as a keyboard style HID device.
Often linked as a clear SparkFun explanation of how shift registers work and how they extend a microcontroller's pins for input and output.
A beginner Arduino project playlist, mostly put forward by its own author as a follow-on to the starter kit, covering techniques such as shift registers.
Ben Eater video on sending data reliably from one Arduino to another, which a couple of viewers praise as an excellent and detailed explanation.
A cheap, simple Arduino servo arm that records movements taught with a second potentiometer arm, often suggested as a satisfying first robotics build.
A practical example of switching 12V loads such as LED strips from an Arduino with a MOSFET, which viewers have used as the basis for their own builds.
DroneBot Workshop shows how to move an Arduino project onto a bare ATmega328 on a breadboard and program it; recommended for shrinking projects and cutting battery drain.
A showcase of an Arduino driven liquid health bar that moves with video game events, admired as an inspiring build rather than a tutorial.
A short AddOhms explainer on the difference between an Arduino and a Raspberry Pi, used to help beginners pick the right board for a project.
A thorough range comparison of nRF24L01 module variants and antennas by iforce2d, with graphs and a downloadable results spreadsheet.
GreatScott builds a DIY buck converter with an Arduino driving a MOSFET, cited as a clear way to understand how step-down switching converters work.
A beginner tutorial on driving a DC motor from an Arduino through a MOSFET, linked whenever someone needs to switch more current than a pin can supply.
A slow-paced Arduino course for complete newcomers, praised for its clear explanations and credited with getting people into the hobby.
Hidden gemGreatScott's DIY solar tracker build, recommended as a fun and achievable first Arduino project that people report enjoying.
A demo of a very cheap serial MP3 module driven from an Arduino, with the maker's own library, credited with solving one poster's serial command problem.
An episode of Jeremy Blum's Arduino tutorial series, widely praised for explaining resistors in a circuit and reading a potentiometer, especially for newcomers.
Pete from SparkFun gives a relaxed overview of MOSFETs and why they suit switching loads from a microcontroller.
A practical guide to wiring a small I2C OLED to an Arduino, including a warning about setting the display address correctly.
A beginner relay tutorial showing an Arduino switching power to a load, though one commenter questions driving the relay straight from a pin.
Tinkernut's smartphone-controlled RC car build, used as the practical follow-on for connecting a Bluetooth module to an Arduino.
A frequently cited explanation of changing Arduino PWM frequency with a dedicated library, the second part of a PWM tutorial series.
A SparkFun video suggested as a first stop when making an Arduino act as a USB keyboard or other HID device, with links to further resources.
Recommended for understanding cheap radar motion sensor modules, comparing several and testing how they behave as an alternative to PIR.
Part of an Arduino tutorial series covering hardware interrupts, often pointed to for its hardware debouncing of a push button with an RC filter and Schmitt trigger.
GreatScott's Electronic Basics episode on stepper motors, offered as a good first explanation of how they step and how to drive them from a microcontroller.
A showcase of an Arduino driven cocktail dispensing robot, often linked as inspiration for what a hobby microcontroller project can become.
A GreatScott introduction to multiplexing LEDs, linked whenever someone wants to drive many LEDs from a few microcontroller pins.
A GreatScott tutorial on using a bipolar transistor as a switch, recommended when a microcontroller pin needs to drive a buzzer, fan or other load.
Recommended as a clear explanation of how salvaged printer optical encoder strips produce quadrature signals you can read for position and direction.
An Arduino project that listens for a knock pattern and turns a deadbolt with a stepper motor, offered as a clamp-on approach or project idea.
The time fountain that strobes LEDs over falling water drops, cited by several Arduino builders as the inspiration for their own attempts.
Andreas Spiess walks through the cheap A6 GSM module, recommended for getting it powered, reset and talking over AT commands from an Arduino.
Paul McWhorter's Arduino lessons, a slow and thorough beginner course that several people credit with making the basics stick despite a repetitive pace.
An Arduino ultrasonic range finder on a pan and tilt servo, suggested as the easiest way to get basic sonar style distance mapping without signal processing skills.
Jeremy Blum's Arduino tutorial on serial communication, pointed to for understanding why incoming characters arrive as ASCII codes and how to convert them to numbers.
A walkthrough of wiring and driving a stepper motor from an Arduino with an A4988 board, including how to set the driver's current limit.
An LED cube showcase linked as an example of Arduino cube projects; one commenter suggests it may be too complicated for a first project.
Introduces Miduino, a web tool that converts MIDI files into ready made Arduino sketches, mostly linked by its own creator.
Dave Jones works through a remote control hack, covering IR carrier signalling and how button matrices work, recommended before building your own IR project.
Linked as a fix for FT232RL FTDI USB serial adapters that appear bricked, restoring the USB product ID so the board is recognised again.
Offered as a tutorial on linking two Arduinos as master and slave, though viewers question the way it shares power between the boards.
The opening lesson of Paul McWhorter's Arduino Uno R4 WiFi course, recommended to complete newcomers who need the programming fundamentals before anything else.
An accessible PID explanation using everyday driving analogies, praised for showing how each of the three terms changes the response.
Hidden gemCited for showing how to drive WS2812 style addressable LEDs directly from a microcontroller without relying on a library.
First lesson of Paul McWhorter's long Arduino course, repeatedly recommended as the starting point for complete beginners with an Uno.
Walks through setting the A4988 stepper driver current limit by adjusting the trim pot to a calculated reference voltage.
An Arduino project that fires a camera from a sensor, offered as a straightforward example of controlling photography hardware.
A showpiece 8x8 LED cube build that people share for inspiration and as proof an Arduino can run a large LED array.
An Arduino automation project people share as an inspiring and relatively affordable example, mentioned alongside CNC and garden builds.
Shown as an eye-catching Arduino demonstration of LEDs reacting to touch and movement, and cited as a practical example of an infrared sensor array.
A music-reactive LED strip project that people point to as a template for their own room lighting, with hardware and code details in the description.
A Japanese project that uses an Arduino to turn a KS0108 graphic LCD into an extra Windows display, often linked as a curiosity when people ask about LCD controllers.
Shows that an ordinary LED can double as a crude light detector, a trick people cite often, with the caveat that it needs plenty of light.
A short video on building a one bit analogue to digital converter, shared by Lady Ada and offered as a simple route from analogue signal to digital edge.
A basic electret microphone and op amp circuit feeding an Arduino, offered as a starting point for sound triggered projects such as shot timers.
Shows an Arduino driving a DMX light via the DmxSimple library with no RS-485 driver chip or shield; one viewer found it simple, others asked how it works.
A short tutorial on making an Arduino Leonardo act as a USB keyboard, linked as a quick starting point for HID projects.
Explains how to drive the RadioShack tri-colour addressable LED strip from an Arduino using the Pololu library, including its power requirements.
A tutorial on pairing 433 MHz transmitter and receiver modules with an Arduino Uno, linked as a starting point for simple wireless projects.
A visual explanation of quadrature encoders, showing why comparing the two output signals reveals direction and why counts exceed the number of teeth.
Explains capacitive liquid level sensing, the approach used in aircraft fuel tanks, and is recommended whenever someone wants to gauge liquid depth without moving parts.
First of a short XBee series covering module setup and basic programming, recommended for getting radios talking despite its quirky presentation.
An Arduino music visualiser build around the MSGEQ7 spectrum chip, pointed to as inspiration for sound reactive lighting projects.
A tutorial on driving a cheap display module from an Arduino Mega, praised as a clear guide and linked to show what such screens can manage.
A commonly cited tutorial on driving DC motors from an Arduino with an L298 bridge driver, covering the enable pins and PWM speed control.
GreatScott's first part of building a 5x5x5 LED cube, widely praised as a detailed and inspiring Arduino LED project.
Hidden gemTeaches direct register control on the ATmega328P to speed up Arduino code, recommended as a clear step beyond digitalWrite.
Hidden gemA tutorial on wireless serial links between two Arduinos using XBee modules, suggested as a starting point even for people using cheaper radios.
Offered to newcomers as a first Arduino exercise, wiring a simple LED circuit on a breadboard with jumper leads from an Uno.
Numberphile's look at Primer, a mechanical counter sculpture that finds prime numbers, which has inspired several hobbyists to build their own versions.
An older clip that members bring up when a new project reminds them of it, linked for comparison rather than as a tutorial.
A short product demonstration of the APDS-9960 gesture and colour sensor, linked when people want a cheap way to detect hand movements.
Part of a beginner Arduino tutorial series, praised for explaining concepts plainly with some humour and bridging gaps left by the starter kit book.
Hidden gemA demonstration of the classic useless box, a servo that flips its own switch back off, linked as a starter idea for playful Arduino builds.
DroneBot Workshop shows how to drive DC motors from an Arduino with an L298N H-bridge, covering speed and direction; a common starting point for motor control questions.
Ben Eater builds an Arduino Nano programmer for AT28C parallel EEPROMs, using shift registers for the address lines; people build it for their own projects.
Repeatedly held up as the clearest explanation of how a particular stepper motor and its driver board work before wiring one to an Arduino.
A companion video on programming custom LED animations, offered to people who have built an LED display and want to make it do more.
The official Arduino Starter Kit video series presented by co-founder Massimo Banzi, recommended as a good way for complete beginners to get going with basic projects.
A detailed look at the RC522 RFID reader module and how to use it with an Arduino, praised as a clear explanation of a fiddly part.
A hobby drumming robot that people link as inspiration for similar builds and as an example of ultrasonic distance sensing on a small robot.
Shows how to wire and drive a 16x2 character LCD from an Arduino, including the contrast potentiometer; people point beginners to it when a display stays blank.
Linked several times without comment in Arduino and Raspberry Pi discussions, apparently around Arduino programming, so little can be said about its content.
A SparkFun tutorial on 4D Systems serial displays with their own built-in interface system, recommended for adding a graphical screen to an Arduino project.
A one-dimensional Pong game built with an Arduino, an addressable RGB LED strip and a couple of buttons, admired as simple and fun.
Linked as a tutorial for building a simple Arduino robot that steers around obstacles, with one builder noting it uses a motor shield rather than a breadboard H-bridge.
A starter tutorial for driving addressable LED strips from an Arduino with the FastLED library, recommended to newcomers asking how to begin.
A general introduction to hobby servos and driving them from an Arduino, recommended as enough to get a first servo project working.
An Arduino rig that cheats at a cookie clicker style game, also listed in a thread about pressing a capacitive touch button without a finger.
Demonstrates using the TLC5940 multi-channel PWM driver with an Arduino to run many RGB LEDs, suggested whenever someone needs more PWM outputs.
The classic useless box that switches itself off, shared as a lighthearted example and as a template for simple self cancelling switch projects.
Demonstrates sending audio across roughly a hundred metres with a cheap laser diode and Arduino, cited as proof of range for optical data links.
Linked as an example of sending digitised audio between Arduino boards over cheap nRF24L01 2.4GHz radio modules.
Fixes an Arduino clone not appearing as a serial port on macOS Sierra by installing the CH340 driver; it helped some people but not all.
Offered a few times as an explanation of the low-level encoding behind basic radio modules, though commenters recall it only loosely.
Explains how brushless motors and ESCs work, then drives an ESC from an Arduino; cited as a wiring and control reference for drone-style motor projects.