1 How to protect circuits from reversed voltage polarity!
Compares diode and P-channel MOSFET reverse polarity protection, showing the MOSFET wastes far less power; a common reference when adding input protection to a board.
Channel
23 recommended videos. Channel on YouTube
Compares diode and P-channel MOSFET reverse polarity protection, showing the MOSFET wastes far less power; a common reference when adding input protection to a board.
Demonstrates the voltage spike when current through an inductive load is suddenly cut and how a flyback diode tames it; often linked for motor and relay driver questions.
A beginner tutorial on using BJTs and MOSFETs as switches, often suggested when a microcontroller pin needs to drive a motor, laser or other larger load.
Afrotechmods examines the saying that current rather than voltage kills, and why voltage still matters through body resistance; linked in electrical safety discussions.
Demonstrates ultracapacitors dumping large currents; cited in threads on shorting capacitors and on whether supercapacitors could replace a car battery.
A beginner tutorial on linear regulators such as the 7805, ending with a USB charger circuit; suggested to people powering an Arduino or Raspberry Pi.
The standard explainer for pulse width modulation, linked whenever someone needs to dim LEDs or control motor speed from a microcontroller.
Covers diode basics and builds a transformer, rectifier and capacitor power supply; recommended within a beginner series, including on why parallel diodes do not share current.
An Afrotechmods tutorial on building a variable linear power supply around the LM317, often suggested as a first analogue project.
Afrotechmods explains a discrete MOSFET H-bridge motor speed controller; suggested for people moving beyond driver modules to understand the basics.
A step-by-step LM386 audio amplifier build that many beginners copy, often followed by questions about its advice to use at least 1000 µF on the output.
An introduction to op-amps that builds a sensitive microphone amplifier, linked by beginners replicating the circuit for audio and sensor projects.
An Afrotechmods tutorial on using an op-amp as a comparator, including a clapper circuit, often linked when someone needs a simple threshold detector without a microcontroller.
Widely praised as a clear introduction to step down switching regulators, covering why they beat linear regulators and how to build a simple one.
A well liked introduction to using a digital multimeter, usually offered to newcomers before they buy or first use one.
Explains amplitude modulation and builds a simple op-amp AM transmitter; the circuit is widely copied, and people often ask how its mixer stage really works.
Shows a simple LM317 constant current circuit, offered as a cheap way to drive LEDs, though its fitness for laser diodes gets questioned.
A short, intuitive introduction to how a boost converter raises voltage, recommended to anyone who needs the basics before building or choosing one.
A tutorial on passive RC high pass filters, recommended as the step for stripping DC offset or low frequency noise out of a microphone or sensor signal.
An Afrotechmods explainer on peak detector circuits, repeatedly suggested to people trying to capture the maximum level of an audio or sensor signal.
Opening video of a power supply series that explains transformers before later parts cover rectifiers and regulators, recommended to beginners building a first linear supply.
An explanation of how voltage dividers work, commonly linked when a beginner needs the idea of splitting a voltage across resistors.
Footage of electrolytic capacitors bursting, shared both for entertainment and to illustrate how the scored vents on the cans fail in a controlled way.